Immersa View Interface for Windows

How to manipulate the data:

1. With the mouse:

To rotate the model:
Click on the 3d model with the left button. You will see a trackball manipulator around the model. Now click and hold the left button and drag the mouse around to rotate the objet.
When activated, the axis of rotation on the trackball manipulator turns yellow.
Click outside the model to turn off the trackball.
Note : The trackball must be activated when you press 'R' on the keyboard to reset. Otherwise , if you used the trackball, deactivated it and then press 'R', the model will still be rotated.

To zoom in and out of the model:
Click on the model with the middle button. Drag the mouse into the screen to push the model further and towards you to bring the model closer.

To move the model sideways:
Click and hold on the model with the right button. As you drag the mouse, the model should follow you and rest wherever you release the right button.
Note : To run the earthquake data on the AGAVE/GeoWall, edit the configuration file 'QuakesConfig.iv'. Change the Left and Right Window geometry. See the section on 'How to load your own configuration settings' for details.

2. With the keyboard:

Key	Function
R	Reset the model to the starting position
P	Toggle animation
+=	Slow down the animation
-_	Speed up the animation
>.	Go to next frame
<,	Go to previous frame
Enter	Toggle autospin (spin around the Y axis of the world)
Shift+Enter	Toggle autospin (spin around the local Y axis)
[ ]	Control autospin speed
WASD	Rotate about X and Y
QE	Rotate about Z
IJKL	Panning in XY
UO	Scaling

3. With the joystick:

Refer to the instructions here on how to configure hardware and software for joystick/game controller support for immersaview.

| home |