Back
to Top
EVL Edit Suite Online Guide
Connecting decks to and from the
AVID can be pretty complicated- this is a list of the different setups you can
use:
| Format | To AVID | From AVID |
| Beta Video | BCB-75 => JVC Switcher (BCB75) => AVID | AVID => JVC Switcher => BVW75 |
| Beta Audio | BCB75 => Patch Panel => AVID Input | AVID => Audio Mixer =>BVW75 (Normaled) |
| Hi8 Video | SVO5800 => DPS290 (set to Hi8) => JVC Switcher(DPS290) => AVID | AVID => JVC Switcher => DPS290 (Cave) => Matrix #4(Video Only)=> Hi8 |
| Hi8 Audio | Hi8 => Matrix (audio only on Patch 5) => Audio Patch (Matrix 5 Out) => AVID input | AVID => Audio patch panel => Matrix input #5 (Audio Only) => Hi8 |
| VHS Video | VHS Deck1 => Matrix => DPS290 (set to Matrix) => JVC Switcher (DPS290)=> AVID | AVID => JVC Switcher => DPS290 (Cave) => Matrix #4 (Video Only) => VHS1 |
|
VHS Audio |
VHS => Matrix (audio only on Patch 5) => Audio Patch (Matrix 5 Out) => AVID input | AVID => Audio patch panel => Matrix input #5 (Audio Only)=>VHS1 |
| Sirrius | JVC Switcher (Sirrius)=> AVID | |
*Note: In addition to connecting
the audio and video in/out, you need to connect the RS-232 Control Signal from
the AVID to the deck you want to control.
Also, be sure to set that deck to "Remote" or "9Pin" Control,
so the deck will allow itself to be controlled from the AVID.
**This is the setup as of 11/1/98